Still image camera settings
There are two kinds of settings for the still image camera:
Image setup
and main settings. To adjust
Image setup
, see
‘Setup settings—adjust color and lighting’, p. 55. The setup
settings return to the default settings after you close the
camera, but the main settings remain the same until you
change them again. To change the main settings, select
Options
>
Settings
and from the following:
Image quality
—
Print 5M - Large
(2592x1944 resolution),
Print 3M - Medium
(2048x1536 resolution),
Print 2M -
Medium
(1600 x 1200),
E-mail 0.8M - Med.
(1024x768
resolution), or
MMS 0.3M - Small
(640x480 resolution).
The better the image quality, the more memory the image
consumes. If you want to print the image, select
Print 5M
- Large
,
Print 3M - Medium
, or
Print 2M - Medium
. If
you want to send it through e-mail, select
E-mail 0.8M -
Med.
. To send the image through MMS, select
MMS 0.3M
- Small
.
These resolutions are only available in the main camera.
Add to album
—Select whether you want to save the image
to a certain album in the gallery. If you select
Yes
, a list of
available albums opens.
Show captured image
—Select
Yes
if you want to see the
captured image after it is taken, or
No
if you want to
continue taking pictures immediately.
Default image name
—Define the default name for the
captured images.
Extended digital zoom
(main camera only)—Select
On
to
allow the zoom increments to be smooth and continuous
between digital and extended digital zoom. If you want to
limit the zoom to where the selected image quality is
maintained, select
Off
.
Capture tone
—Select the tone you want to hear when you
take a picture.
Memory in use
—Select where to store your images.
Rotate image
- Select whether you want the image to be
rotated the right way up when you open it in the gallery.
Restore camera settings
—Select
Yes
to return the default
values to the camera settings.
Camera
55