Call
,
Call
divert
,
Call barring
, or
Network
.
Call
Send my caller ID
—You can set your phone number to be
displayed to (
Yes
) or hidden from (
No
) the person to whom
you are calling, or the value may be set by your service
provider when you make a subscription (
Set by network
)
(network service).
Call waiting
—If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. Set the function on
(
Activate
) or off (
Cancel
), or check whether the function
is activated (
Check status
).
Reject call with SMS
—Select
Yes
to send a text message
to a caller informing why you could not answer the call.
See ‘Answer or decline a call’, p. 105.
Message text
—Write a text to be sent in a text message
when you reject a call.
Settings
126
Image in video call
—If video is not sent during a video call,
you can select a still image to be displayed instead.
Automatic redial
—Select
On
, and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialling,
press .
Show call duration
—Activate this setting if you want the
length of a call to be displayed during the call.
Speed dialling
—Select
On
, and the numbers assigned to
the speed dialling keys (
-
) can be dialled by
pressing and holding the key. See also ‘Speed dial a phone
number’, p. 100.
Anykey answer
—Select
On
, and you can answer an
incoming call by briefly pressing any keypad key, except
, , ,
and .
Line in use
—This setting (network service) is shown only if
the SIM card supports two subscriber numbers, that is, two
phone lines. Select which phone line you want to use for
making calls and sending text messages. Calls on both lines
can be answered irrespective of the selected line. If you
select
Line 2
and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected,
is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold
in the standby mode.
Line change
—To prevent line selection (network service),
select
Disable
if supported by your SIM card. To change
this setting, you need the PIN2 code.